Frank O' Lantern

Create this hybrid of Frankenstein and a jack o' lantern for your Halloween festivities.
|

Click for bigger picture
|
DecoArt Products Required
Waxed paper
Black craft fur, 3" x 6", Darice
Lo-temp glue gun and glue sticks
Foam plate
1" flat brush
30-mm round foam pouncer brush
|
Poly foam-filled pumpkin (approx. 8" tall, 6" wide and 17 1/2" around at mid-point)
|
1. Place waxed paper on work surface. Basecoat pumpkin with Multi-Purpose Sealer.
2. Squeeze Citron Green onto plate. Use flat brush to apply paint to pumpkin. (A hair dryer on low setting can be used to partially dry paint so you can set pumpkin down on waxed-papered surface until fully dry.) Apply second coat of paint, if necessary, for complete coverage.
3. Referring to photo for placement, use pouncer brush dipped in Snow White to paint eyeballs. Allow to dry.
4. Use Black Americana Writer to paint wiggly lines for eyebrows, jagged line for mouth, curved line for nose, and dots for eyes. (Refer to photo for placement.) Use Christmas Green Americana Writer to create stitches and scars on pumpkin's face.
5. Spray pumpkin with Americana Gloss Spray and allow to dry.
|
Return
|